Evoca EV1

EV1
LS343
An architectural-grade, high-powered inground uplighter
Configure this product

Product Overview

The LS343 is a premium inground luminaire with outstanding performance. Independent labs tests rated the housing as fully sealed, with it rated for submersion up to 33ft (10m). The glass surface is safe to touch when fitted with HumanTouch™. Re-lamping and re-sealing on site is simple and robust. Extensive choice of lamps and accessories make the LS343 suitable for most uplighting applications.

Features

Power Consumption TBA Control Protocol NONE Diameter 25.6cm (10.1") Static Load Rating 4,200kg (9,259lb) IP Rating IP68 IK Rating IK10 with OptiClear lens Compliance ETL - USA & Canada Colour Options Warm White

Product Configurator

Customise Evoca EV1 below

Installation Type

Select the installation type you require.

Direct Burial

Direct Burial

Pre-Installation

Pre-Installation

Lamp

Required

39W

T6 Metal Halide with G12 base and an Magnetic ballast

39W

39W

T6 Metal Halide with G12 base and an Electronic ballast

70W

70W

T6 Metal Halide with G12 base and an Electronic ballast

70W

70W

T6 Metal Halide with G12 base and an Magnetic ballast

Lens

Required

OptiClear™

OptiClear™

Glass of very high optical purity and load strength. Suitable for walk-over and drive-over applications.

GripGlass™

GripGlass™

OptiClear™ glass with slip reduction glazing process. Suitable for walk-over and drive-over applications.

Cover

Required

Round recessed, stainless steel, polished

Round recessed, stainless steel, polished

Round recessed, stainless steel, brushed

Round recessed, stainless steel, brushed

Round flush type, stainless steel, polished

Round flush type, stainless steel, polished

Round flush, stainless steel, brushed

Round flush, stainless steel, brushed

Round flush, stainless steel, polished

Round flush, stainless steel, polished

Round flush, stainless steel, brushed

Round flush, stainless steel, brushed

Connection Type

Required

Type 84 - 6.5' SOOW Cord

Type 84 - 6.5' SOOW Cord

For connection to the branch circuit via junction box (by others) or other approved method. Comes with 6.5' SOOW Cord (16/3). For pre-installation applications a pre-installation kit is required - order separately.

Type 82 - ½ inch NPT Adapter

Type 82 - ½ inch NPT Adapter

½” NPT Adapter with hook up wire for hard wired installations, includes MicroAntileach

Type 87 - IP68 Connector & Junction Box

Type 87 - IP68 Connector & Junction Box

Not suitable for colour changing or dimming applications. Pre-installation kit required - order separately. For all applications requiring mounting collar, consult factory

Beam Angles

Published angles may vary slightly to photo-metric data. Please refer to IES files where relevant.

Required

Narrow

Narrow

10° with Aluminium reflector

Medium

Medium

28 ̊ with Aluminium reflector

Flood

Flood

70 ̊ with Aluminium reflector

Wide Flood

Wide Flood

140 ̊ with Aluminium reflector

Narrow

Narrow

10° with Pure Optics

Medium

Medium

18° with Pure Optics

Flood

Flood

48° with Pure Optics

Wide Flood

Wide Flood

60° with Pure Optics

Housing Depth

Required

Direct Burial

13.95" (354mm)

Pre-Install Blockout

19.45” (494mm)

Cable Entry

Required

Side

Side

Bottom

Bottom

Input Voltage

Required

120-277V, 50/60Hz

120-277V, 50/60Hz

Mains Voltage

Accessories

Shielding & Glare Control

Slatted Louvre

165mm slatted louvre

Cross Hatch Louvre

Cross Hatch Louvre

165mm Cross hatch louvre

Wall wash lens

Wall wash lens

165mm refractor lens

Cylindrical Louvre

Cylindrical louvre for T6 lamps in Pure Optics Reflectors

Cross Hatch Louvre

Cross Hatch Louvre

96mm Cross Hatch louvre for T6 lamps in Pure Optics Reflectors

Lens

Linear Spreader

Linear Spreader

Linear Spreader

Linear Spreader

96mm Linear spreader lens for T6 lamps with Pure Optics Reflectors

Prismatic

Prismatic

Prismatic Lens for T6 lamps in Pure Optics Reflectors

Human Touch

HumanTouch

HumanTouch

HumanTouch kit for T6 lamps in PureOptics reflectors

HumanTouch

HumanTouch

HumanTouch kit for T6 lamps in Aluminium reflectors

Pre-Installation Options

Pre-Install Blockout

Pre-Install Blockout

For use with mains voltage. Includes 1m MicroAntiLeach cable with an IP68 connector and a 3 way junction box. Not suitable for dimmable luminaires.

Pre-Install Blockout

Pre-Install Blockout

For use with Type 84 connection. Connection to the branch circuit via junction box (supplied by others) or other approved method.