Evoca EVX

EVX
LS363
A compact medium-powered inground uplighter
Configure this product

Product Overview

The LS363 inground features 20W metal halide technology. HumanTouch™ is an important feature of this series, allowing placement in accessible areas. Adjustability of the reflector ensures light is delivered where it is required. The introduction of metal halide to this series now offers an attractive alternative to halogen in the same package size.

THIS LUMINIARE IS ONLY AVAILABLE IN NORTH AMERICA

Features

Power Consumption TBA Diameter 20.4cm (8") Static Load Rating 1,800kg (3,968lb) IP Rating IP68 IK Rating IK9 with OptiClear lens Compliance ETL - USA & Canada Colour Options BIM Blue Cool White Warm White RGB Download Datasheet

Product Configurator

Customise Evoca EVX below

Installation Type

Select the installation type you require.

Direct Burial

Direct Burial

Pre-Installation

Pre-Installation

Lamp

Required

20W

20W

T4 Metal Halide with GU6.5 base

50W

50W

MR16 Magnetic Transformer

Lens

Required

OptiClear™

OptiClear™

Glass of very high optical purity and load strength. Suitable for walk-over and drive-over applications.

GripGlass™

GripGlass™

OptiClear™ glass with slip reduction glazing process. Suitable for walk-over and drive-over applications.

Cover

Required

Round recessed, stainless steel, polished

Round recessed, stainless steel, polished

Round recessed, stainless steel, brushed

Round recessed, stainless steel, brushed

Round flush type, stainless steel, polished

Round flush type, stainless steel, polished

Round flush, stainless steel, brushed

Round flush, stainless steel, brushed

Round flush, stainless steel, polished

Round flush, stainless steel, polished

Round flush, stainless steel, brushed

Round flush, stainless steel, brushed

Connection Type

Required

Type 82 - ½” NPT Adapter

Type 82 - ½” NPT Adapter

½” NPT Adapter with hook up wire for hard wired installations, includes MicroAntileach

Type 84 - ½” NPT Adapter

Type 84 - ½” NPT Adapter

Flexible cable for hard wired installations, includes MicroAntileach. For pre-installation applications a pre-installation kit is required - order separately.

Type 87 - IP68 Connector

Type 87 - IP68 Connector

Not suitable for colour changing or dimming applications. Pre-installation kit required - order separately. For all applications requiring mounting collar, consult factory

Beam Angles

Published angles may vary slightly to photo-metric data. Please refer to IES files where relevant.

Required

Narrow

Narrow

12 ̊ with Aluminium reflector

Medium

Medium

30 ̊ with Aluminium reflector

Flood

Flood

54 ̊ with Aluminium reflector

Wide Flood

Wide Flood

74 ̊ with Aluminium reflector

Adjustable

Housing Depth

Required

Direct Burial - 8.7” (220mm)

Pre-Install Blockout - 14.6” (372mm)

Cable Entry

Required

Side

Side

Bottom

Bottom

Input Voltage

Required

120-277V, 50/60Hz

120-277V, 50/60Hz

Mains Voltage

120V, 60Hz

120V, 60Hz

Accessories

Shielding & Glare Control

Concentric Louvre

Concentric Louvre

80mm Concentric Louvre for T4 MH lamps

Louvre

Linear Spreader Lens

Linear Spreader Lens

82mm Linear spreader lens for Centria series

Prismatic Lens

Prismatic Lens

82mm Prismatic lens for Centria series

Reflectors

For use with non-LED MH reflectors

HumanTouch

HumanTouch

For use with Non-LED Metal Halide lamps

Cross Hatch Louvre

Cross Hatch Louvre

For use with Non-LED Metal Halide lamps

Frosted Filter

Frosted Filter

For use with Non-LED Metal Halide lamps

Lens

Linear Spreader

Linear Spreader

50mm Linear Spreader for MR16 lamps

Pre-Installation Options

Pre-Install Blockout

Pre-Install Blockout

For use with Type 84 connection. Includes 6.5' SOOW Cord. Connection to the branch circuit via junction box (supplied by others) or other approved method.

Pre-Install Blockout

Pre-Install Blockout

For use with low voltage. Includes 1m MicroAntiLeach cable with an IP68 connector and a 3 way junction box. Not suitable for dimmable luminaires.