Evoca LED EV8

EV8
LS853LED
A compact and powerful inground uplighter
Configure this product

Product Overview

The LS853LED Evoca is a full-featured, shallow-depth inground luminaire featuring lumen output and efficacy which exceeds metal halide. As an inherently protected luminaire, it can be used in interior spaces and immediately adjacent to combustible materials (such as wood decking, etc). Dimming options include 0-10V and PWM protocols, with various power input options. In addition, internal rotation and tilt adjustability ensure the most efficient light delivery can be set according to site conditions.

Features

Lumen Output 1,720lm Power Consumption 21.1W Control Protocol PWM (0-10V, DMX, DALI) Diameter 25.6cm (10.1") Static Load Rating 4,200kg (9,259lb) IP Rating IP68 IK Rating IK10 with OptiClear lens Compliance ETL - USA & Canada Colour Options BIM DALI Blue Cool White Warm White RGB

Product Configurator

Customise Evoca LED EV8 below

Installation Type

Select the installation type you require.

Direct Burial

Direct Burial

Pre-Installation

Pre-Installation

Power Consumption

Required

16W

16W

20W

20W

Light Source

Required

3,000 K (80 CRI)

3,000 K (80 CRI)

Warm White

4,000 K (80 CRI)

4,000 K (80 CRI)

Cool White

470nm

470nm

Blue

RGB

RGB

Lens

Required

OptiClear™

OptiClear™

Glass of very high optical purity and load strength. Suitable for walk-over and drive-over applications.

GripGlass™

GripGlass™

OptiClear™ glass with slip reduction glazing process. Suitable for walk-over and drive-over applications.

Cover

Required

Round recessed, stainless steel, polished

Round recessed, stainless steel, polished

Round recessed, stainless steel, brushed

Round recessed, stainless steel, brushed

Round flush type, stainless steel, polished

Round flush type, stainless steel, polished

Round flush, stainless steel, brushed

Round flush, stainless steel, brushed

Round flush, stainless steel, polished

Round flush, stainless steel, polished

Round flush, stainless steel, brushed

Round flush, stainless steel, brushed

Connection Type

Required

Type 82 - ½” NPT Adapter

Type 82 - ½” NPT Adapter

½” NPT Adapter with hook up wire for hard wired installations, includes MicroAntileach

Type 84 - ½” NPT Adapter

Type 84 - ½” NPT Adapter

Flexible 6.5' SOOW cable for hard wired installations, includes MicroAntileach

Type 87 - IP68 Connector

Type 87 - IP68 Connector

Not suitable for colour changing or dimming applications. Pre-installation kit required - order separately. For all applications requiring mounting collar, consult factory

Beam Angles

Published angles may vary slightly to photo-metric data. Please refer to IES files where relevant.

Required

Narrow

Narrow

14º

Narrow Medium

Narrow Medium

20º

Medium

Medium

20º

Medium

Medium

25º

Wide

Wide

30º

Wide

Wide

40º

Linear Horizontal

Linear Horizontal

40˚ x 10˚

Linear Vertical

Linear Vertical

10˚ x 40˚

Linear Horizontal

Linear Horizontal

40º x 20º

Linear Vertical

Linear Vertical

20º x 40º

Housing Depth

Required

Direct Burial - 7.1" (180mm)

Pre-Install Blockout - 12.48” (317mm)

Cable Entry

Required

Side

Side

Bottom

Bottom

Input Voltage

Required

120-277V, 50/60Hz

120-277V, 50/60Hz

Mains Voltage

12V 60Hz or 12-24V DC

12V 60Hz or 12-24V DC

12-15V, 60 Hz

12-15V, 60 Hz

Low Voltage

12-15V 60Hz or 12-24V DC

12-15V 60Hz or 12-24V DC

PWM Dimmable Driver

Accessories

Shielding & Glare Control

Slatted Louvre

165mm slatted louvre

Cross Hatch Louvre

Cross Hatch Louvre

165mm Cross hatch louvre

Wall wash lens

Wall wash lens

165mm refractor lens

Wide angle lens

Wide angle lens

Lens

Linear Spreader

Linear Spreader

Prismatic

Prismatic

Prismatic lens

Pre-Installation Options

Pre-installation kit

Pre-installation kit

For use with Type 84 connection. Includes 6.5' SOOW Cord. Connection to the branch circuit via junction box (supplied by others) or other approved method.

Pre-Install Blockout

Pre-Install Blockout

For use with mains voltage. Includes 1m MicroAntiLeach cable with an IP68 connector and a 4 way junction box. Not suitable for dimmable luminaires.

Power Supplies / Transformers

96W 24V Power Supply

96W 24V Power Supply

96W, 24V output

12W 24V Power Supply

12W 24V Power Supply

12W wet locations power supply with 24V output for use with LS6133 0-10V to PWM converter only.

Control Translator

Refer to wiring diagrams for compatability

DMX to PWM Translator

DMX to PWM Translator

Translate standard DMX-512 to PWM control signals

0-10V to PWM Translator

0-10V to PWM Translator

Translate standard 0-10V to PWM control signals