Terraluz TE5 - LS3150

A high-output, linear inground luminaires for architectural and infrastructure applications.

Product Overview

Features

Lumen Output 7,785 lm LED Power 12 W/ft | 16 W/ft Power Consumption 19 W/ft | 24 W/ft Typical Lifetime > 60,000 hours Input Voltage 120-277 Vac, 50/60 Hz Earth Leakage 0.6 mA @ 220 V Control Interface PowerSync™ Control Protocol DMX/RDM, Artnet, PWM, 0-10 V IP Rating IP66 / IP67 (IP68 Tested) IK Rating IK9 Colour Options Warm White Cool White Red Green Blue RGBA RGBW RGBW with Royal Blue Tunable White Download Datasheet

Specifications

Product Configurator

Customise Terraluz TE5 below

Colour System

Single Colour

Single Colour

Colour Changing

Colour Changing

Tunable White

Tunable White

Light Engine

Required

12 W/ft (12W)

16 W/ft (16W)

Light Source

Required

Static White (827)

Static White (827)

2,700 K (80 CRI, 3 SDCM)

Static White (830)

Static White (830)

3,000K (80 CRI, 3 SDCM)

Static White (835)

Static White (835)

3,500K (80 CRI, 3 SDCM)

Static White (840)

Static White (840)

4,000 K (80 CRI, 3 SDCM)

Static White (750)

Static White (750)

5,000K (70 CRI, 3 SDCM)

Single Colour (RED)

Single Colour (RED)

Red

Single Colour (GRN)

Single Colour (GRN)

Green

Single Colour (BLU)

Single Colour (BLU)

Blue

Dynamic Colour (4CA)

Dynamic Colour (4CA)

RGBA

Dynamic Colour (4CW)

Dynamic Colour (4CW)

RGBW

Dynamic Colour (4BW)

Dynamic Colour (4BW)

RGBW with Royal Blue

Tunable White (2WT)

Tunable White (2WT)

2,700 K - 6,500 K

Lens

Required

OptiClear™ (A)

OptiClear™ (A)

Glass of very high optical purity and load strength. Suitable for walk-over and drive-over applications.

GripGlass™ (G)

GripGlass™ (G)

OptiClear™ glass with slip reduction glazing process. Suitable for walk-over and drive-over applications.

Connection Type

Required

Connectorized for loop in/out (73)

Connectorized for loop in/out (73)

For connection to the branch circuit via LS6435 Leader cable. Supports loop in/out.

Connectorized for single connection point (77)

Connectorized for single connection point (77)

For connection to the branch circuit via LS6435 Leader cable. Loop in/out not supported.

Beam Angles

Published angles may vary slightly to photometric data. Please refer to IES files where relevant.

Required

Very Narrow (VN)

Very Narrow (VN)

Narrow Medium (NM)

Narrow Medium (NM)

15°

Medium (ME)

Medium (ME)

30°

Wide (WD)

Wide (WD)

45°

Wide Flood (WF)

Wide Flood (WF)

65°

Linear Horizontal (LH)

Linear Horizontal (LH)

10º x 60º

Narrow Horizontal (NH)

Narrow Horizontal (NH)

10º x 40º

Medium Horizontal (MH)

Medium Horizontal (MH)

20º x 40º

Wide Horizontal (WH)

Wide Horizontal (WH)

20º x 60º

Internal Shielding

Required

Full pitch (F)

Half Pitch (H)

None (N)

Input Voltage

Required

120-277 Vac, 50/60 Hz (09)

120-277 Vac, 50/60 Hz (09)

Mains Voltage

Control

Required

Non-dimming (ND)

For single color, non-dimming applications only.

PowerSync™ (PS)

PowerSync™ (PS)

Required for all dimming and color-changing applications. LS6540 (mains voltage) or LS6550 (low voltage) data injector required (order separately).

Accessories

Pre-Installation Starter Kits

3ft Starter Section (LS6312-3)

Includes end caps.

3ft Starter Section - Steel Trim (LS6312-3SS)

Includes end caps and stainless steel trim.

Pre-Installation Mid/End Section Kits

3ft Extension Section (LS6313-3)

Includes joiner (no end caps).

3ft Extension Section - Steel Trim (LS6313-3SS)

Includes joiner and stainless steel trim (no end caps).

Pre-Installation T/L Joiner Kits

3ft T/L Joiner Section (LS6314-3)

Includes T/L Joiner and one end cap.

3ft T/L Joiner Section - SS Trim (LS6314-3SS)

Includes T/L Joiner, one end cap and stainless steel trim.