Products
•
Linealux L5 Generation 2

Linealux L5 Generation 2 - LS9050

A high-output linear graze luminaire for architectural and infrastructure applications.

Configure this product Features Specifications

Product Overview

Features

Lumen Output 2,163 lm/ft Power Consumption 19 W/ft, 23 W/ft Typical Lifetime (TM21 Reported) > 60,000 hours @ 50°C Ambient (B10, L90, TM21 Reported) Typical Lifetime (TM21 Projected) 71,575 hours @ 50°C Ambient (B10, L90, TM21 Projected) Input Voltage International: 220-240 Vac, 50 Hz | North America: 120/277 Vac, 60 Hz Earth Leakage 0.2 mA @ 120 Vac, 0.42 mA @ 240 Vac, 0.24 mA @ 277 Control Interface PowerSync Control Protocol DMX/RDM, Artnet, PWM, 0-10 V (Sink or Source) IP Rating IP66 / IP67 (Passes IP68 Test) IK Rating IK6 Vibration Resistance 3G Rating (ANSI 136.31) Color Options Warm White

Data Sheet

Specifications

Downloads

Data Sheet Install Guide

IES Files LS9050 V2 ZIP (8.97 M) DXF Files LS9050 Gen 2 ZIP (2.99 M) Product Flyer LS9050 Gen 2 PDF (266.98 KB)

Product Configurator

Length

Select the luminaire length

1 ft (322 mm)

2 ft (618 mm)

3 ft (915 mm)

4 ft (1,212 mm)

LS9050 _ _ _ _ - 2 _ _ _ _ _

Reset to Default Clear Selected Add

Customise Linealux L5 Generation 2 below

Power Consumption

For all PowerSync Controlled Luminaires

Required

19 W/ft (19D)

23 W/ft (23D)

Light Source

Required

Static White (827)

2,700 K (80 CRI, 3 SDCM)

Static White (830)

3,000K (80 CRI, 3 SDCM)

Static White (835)

3,500K (80 CRI, 3 SDCM)

Static White (840)

4,000 K (80 CRI, 3 SDCM)

Static White (750)

5,000K (70 CRI, 3 SDCM)

Dynamic Colour (4CA)

RGBA

Dynamic Colour (4BW)

RGBW with Royal Blue

Tunable White (2WT)

2,700 K - 6,500 K

Connection Type

Required

Connectorized for loop in/out (73)

For connection to the branch circuit via LS6402 Leader cable. Supports loop in/out.

Connectorized for single connection point (77)

For connection to the branch circuit via LS6402 Leader cable. Loop in/out not supported.

Loop in/out (86)

For connection to the branch circuit via hookup wire and ½” NPT terminal adapter. This configuration features loop in/out capability. Requires hardwired connection point at each end of luminaire.