Products
•
Vestalux V2

Vestalux V2 - LS9016

A high-performance exterior grade architectural, direct-view outliner.

Configure this product Features Specifications Videos

Product Overview

Features

Lumen Output 598 lm/ft Power Consumption 5 W/ft, 7 W/ft Typical Lifetime (TM21 Reported) > 72,000 hours @ 50°C Ambient (B10, L90, TM21 Reported) Typical Lifetime (TM21 Projected) 84,678 hours @ 50°C Ambient (B10, L90, TM21 Projected) Input Voltage Low Voltage 30-48 Vdc Input Voltage (International) Line Voltage 220-240 Vac, 50 Hz Input Voltage (NA only) Line Voltage 120/277 Vac, 60 Hz Control Interface PowerSync™ Control Protocol DMX/RDM, Artnet, PWM, 0-10 V PWM Frequency 10 kHz flicker-free dimming to 0.1% IP Rating IP66/IP67 (Passes IP68 Test) IK Rating IK10 Color Options Warm White

Data Sheet

Specifications

Videos

Poduct Highlights | Vestalux V2

An introduction to the Vestalux V2 direct view luminaire from Lumascape.

Webinar | Vestalux V2

Watch our short webinar on the Vestalux V2 Direct View Outliner by Lumascape.

Downloads

Data Sheet

Install Instructions Low Voltage PDF (2.94 M) Install Instructions Line Voltage PDF (895.68 KB) DXF Files LS9016 ZIP (5.46 M) IES Files LS9016 ZIP (3.37 M) Product Flyer LS9016 PDF (609.43 KB) Advertisement LS9016 PDF (738.19 KB)

Product Configurator

Length

Select the luminaire length

1 ft (323 mm)

2 ft (622 mm)

3 ft (920 mm)

4 ft (1,219 mm)

5 ft (1,516 mm)

LS9016 _ _ _ _ - 2 _ _ _ _ _

Reset to Default Clear Selected Add

Customise Vestalux V2 below

Power Consumption

For all PowerSync Controlled Luminaires

Required

5 W/ft (05D)

5 W/ft

7 W/ft (07D)

7 W/ft

Light Source

Required

Static White (827)

2,700 K (80 CRI, 3 SDCM)

Static White (830)

3,000K (80 CRI, 3 SDCM)

Static White (835)

3,500K (80 CRI, 3 SDCM)

Static White (840)

4,000 K (80 CRI, 3 SDCM)

Static White (850)

5,000K (80 CRI, 3 SDCM)

Dynamic Colour (4CA)

RGBA

Dynamic Colour (4BW)

RGBW with Royal Blue

Tunable White (2WT)

2,700 K - 6,500 K

Connection Type

Required

Connectorized for loop in/out (63)

For connection to the branch circuit via LS6426 Leader cable. Supports loop in/out.

Connectorized for loop in/out (73)

For connection to the branch circuit via Lumascape supplied leader cables, and interconnection via Lumascape supplied jumper cables. This configuration features loop in/out capability using IP68 rated connectors for a tool free final connection at each end of the luminaire.