Evoca LED EV3

EV3
LS363LED
A compact inground uplighter
Configure this product

Product Overview

The LS363LED is a robust, medium-wattage ingrade luminaire, featuring high-efficacy LEDs. As an inherently protected luminaire it can be used in interior spaces and immediately adjacent to combustible materials (such as wood decking, etc). In addition, internal rotation and tilt adjustability ensures the most efficient light delivery can be set according to the site conditions.

Features

Lumen Output 1,330lm Power Consumption 20W Control Protocol PWM (0-10V, DMX) Static Load Rating 1,800kg (3,968lb) Diameter 20.4cm (8") IP Rating IP68 IK Rating IK9 with OptiClear lens Compliance ETL - USA & Canada Colour Options BIM Blue Cool White Warm White RGB

Product Configurator

Customise Evoca LED EV3 below

Installation Type

Select the installation type you require.

Direct Burial

Direct Burial

Pre-Installation

Pre-Installation

Power Consumption

Required

16W

16W

Light Source

Required

3,000 K (80 CRI)

3,000 K (80 CRI)

Warm White

4,000 K (80 CRI)

4,000 K (80 CRI)

Cool White

470nm

470nm

Blue

Lens

Required

OptiClear™

OptiClear™

Glass of very high optical purity and load strength. Suitable for walk-over and drive-over applications.

GripGlass™

GripGlass™

OptiClear™ glass with slip reduction glazing process. Suitable for walk-over and drive-over applications.

Cover

Required

Round recessed, stainless steel, polished

Round recessed, stainless steel, polished

Round recessed, stainless steel, brushed

Round recessed, stainless steel, brushed

Round flush type, stainless steel, polished

Round flush type, stainless steel, polished

Round flush, stainless steel, brushed

Round flush, stainless steel, brushed

Round flush, stainless steel, polished

Round flush, stainless steel, polished

Round flush, stainless steel, brushed

Round flush, stainless steel, brushed

Connection Type

Required

Type 82 - ½” NPT Adapter

Type 82 - ½” NPT Adapter

½” NPT Adapter with hook up wire for hard wired installations, includes MicroAntileach

Type 84 - ½” NPT Adapter

Type 84 - ½” NPT Adapter

Flexible cable for hard wired installations, includes MicroAntileach. For pre-installation applications a pre-installation kit is required - order separately.

Type 87 - IP68 Connector

Type 87 - IP68 Connector

Not suitable for colour changing or dimming applications. Pre-installation kit required - order separately. For all applications requiring mounting collar, consult factory

Beam Angles

Published angles may vary slightly to photo-metric data. Please refer to IES files where relevant.

Required

Narrow

Narrow

14º

Medium

Medium

20º

Wide

Wide

30º

Linear Horizontal

Linear Horizontal

40˚ x 10˚

Linear Vertical

Linear Vertical

10˚ x 40˚

Housing Depth

Required

Direct Burial - 8.7” (220mm)

Pre-Install Blockout - 14.6” (372mm)

Cable Entry

Required

Side

Side

Bottom

Bottom

Input Voltage

Required

120-277V, 50/60Hz

120-277V, 50/60Hz

Mains Voltage

120V/60Hz

120V/60Hz

Forward Phase Dimmable Driver

Accessories

Pre-Installation Options

Pre-Install Blockout

Pre-Install Blockout

For use with Type 84 connection. Includes 6.5' SOOW Cord. Connection to the branch circuit via junction box (supplied by others) or other approved method.

Pre-Install Blockout

Pre-Install Blockout

For use with low voltage. Includes 1m MicroAntiLeach cable with an IP68 connector and a 3 way junction box. Not suitable for dimmable luminaires.