Evoca LED EV4

EV4
LS393LED
A compact inground uplighter
Configure this product

Product Overview

The LS393LED is a compact inground option featuring a 6W LED module with output similar to a 50W MR16. With options for line voltage input and dimming via Lumascape d5 driver technology, this inherently protected, compact luminaire is suitable for use in many locations where MR16-based luminaires cannot be used due to heat. Internal rotation and tilt adjustability ensures the most efficient light delivery can be set according to the site conditions.

Features

Lumen Output 550lm Power Consumption 7.9W Control Protocol PWM (0-10V, DMX, DALI) Diameter 17.2cm (6.8") Static Load Rating 3,750kg (8,267lb) IP Rating IP68 IK Rating IK9 with OptiClear lens Compliance ETL - USA & Canada Colour Options BIM DALI Blue Cool White Warm White RGB

Product Configurator

Customise Evoca LED EV4 below

Installation Type

Select the installation type you require.

Direct Burial

Direct Burial

Pre-Installation

Pre-Installation

Power Consumption

Required

3W

3W

6W

6W

Light Source

Required

3,000 K (80 CRI)

3,000 K (80 CRI)

Warm White

4,000 K (80 CRI)

4,000 K (80 CRI)

Cool White

470nm

470nm

Blue

RGB

RGB

Lens

Required

OptiClear™

OptiClear™

Glass of very high optical purity and load strength. Suitable for walk-over and drive-over applications.

GripGlass™

GripGlass™

OptiClear™ glass with slip reduction glazing process. Suitable for walk-over and drive-over applications.

Cover

Required

Round recessed, stainless steel, polished

Round recessed, stainless steel, polished

Round recessed, stainless steel, brushed

Round recessed, stainless steel, brushed

Round flush type, stainless steel, polished

Round flush type, stainless steel, polished

Round flush, stainless steel, brushed

Round flush, stainless steel, brushed

Round flush, stainless steel, polished

Round flush, stainless steel, polished

Round flush, stainless steel, brushed

Round flush, stainless steel, brushed

Connection Type

Required

Type 84 - 6.5' SOOW Cord

Type 84 - 6.5' SOOW Cord

For connection to the branch circuit via junction box (by others) or other approved method. Comes with 6.5' SOOW Cord (16/3). For pre-installation applications a pre-installation kit is required - order separately.

Type 82 - Single Entry

Type 82 - Single Entry

½ inch NPT Adapter

Type 87 - IP68 Connector & Junction Box

Type 87 - IP68 Connector & Junction Box

Not suitable for colour changing or dimming applications. Pre-installation kit required - order separately. For all applications requiring mounting collar, consult factory

Beam Angles

Published angles may vary slightly to photo-metric data. Please refer to IES files where relevant.

Required

Narrow

Narrow

14º

Narrow Medium

Narrow Medium

20º

Medium

Medium

25º

Wide

Wide

40º

Linear Horizontal

Linear Horizontal

40˚ x 10˚

Linear Vertical

Linear Vertical

10˚ x 40˚

Housing Depth

Required

Pre-Install Blockout - 11.5” (292mm)

Direct Burial - 5.2” (133mm)

Cable Entry

Required

Side

Side

Bottom

Bottom

Input Voltage

Required

120-277V, 50/60Hz

120-277V, 50/60Hz

Mains Voltage

12V 60Hz or 12-24V DC

12V 60Hz or 12-24V DC

12-15V 60Hz or 12-24V DC

12-15V 60Hz or 12-24V DC

PWM Dimmable Driver

Accessories

Lens

Prismatic

Prismatic

Linear Spreader

Linear Spreader

Pre-Installation Options

Pre-installation kit

Pre-installation kit

For use with Type 84 connection. Connection to the branch circuit via junction box (supplied by others) or other approved method.

Pre-Install Blockout

Pre-Install Blockout

For use with mains voltage. Includes 1m MicroAntiLeach cable with an IP68 connector 4 way junction box. Connection to the branch circuit via junction box (supplied by others) or other approved method.